- Home
- Heat Shrink Tubing
- Cable Ties
- Braided Sleeving
- Bentley Harris
- Label and Heat Shrink Printers
- Heat Shrink Cutters
- Plastic Tubing
- Heat Guns and Tools
- Floor Cord and Cable Covers
- Power & Data Distribution
- Audio/Video/Network Cables & accessories
- Site Map
- Shipping and Ordering Policies
- Frequently Asked Questions
-
-
Fabric Heat Shrinkable Tubing
Ideal for high flex and/or highly abrasive environments
Click Picture for an enlarged view
A unique mixture of Polyolefin Weft and Polyester Warp yarns woven together to form the only shrinkable fabric of its kind. Ideal for use on pipes, wire harnesses, rubber hoses, etc, heat shrinkable fabric tubing combines outstanding fluid resistance with extreme abrasion resistance. Because of its high flexibility, shrink fabric can be used on bent hoses without fear of the tubing sliding off.
Features:
- 2:1 Shrink Ratio (shrinks to 1/2 its original diameter)
- Up to 20% Longitudinal (lengthwise) shrinkage
- Meets MVSS 302 Horizontal Burn Test
- Low shrink temperature (80°C) for safe installation onto heat sensitive substrates
- Operating temperature of -40°C to + 125°C
- Exact match to : Tyco Raychem HT5000, Alpha Wire FIT FABRIC
- Superior abrasion resistance over a wide temperature range, yet cuts easily with scissors
- Halogen Free
- Outstanding fluid resistance for moisture and splash protection
- APPLICATIONS: Mechanical abrasion protection, Severe environment protection, Noise and rattle protection, Flexing applications
- Chemical Resistance :
- Hydraulic Fluid
- Lubricating Oil
- Water
- Antifreeze (50% ethylene glycol)
- Brake Fluid (DOT 4)
- Engine Oil
- Unleaded Gasoline
- Mineral Hydraulic Fluid
- Diesel Fuel
- Detergent (1% Teepol)
- Battery Acid
2:1
Fabric Heat Shrink Tubing - Ordering information
Color available: Black Note: Tubing is always referred to by Nominal ID, not flat width.
Nominal Size (Diameter) |
Size after shrinking |
Wall | ft/spool |
Price/spool |
|
| 0.380 | 0.190" | 0.039 | 300 | $196 | |
| 50 | $80 | ||||
| 15 | $30 | ||||
0.472" |
0.236" |
0.039 | 300 |
$270 |
|
| 50 | $87.50 | ||||
| 15 | $26.25 | ||||
0.787" |
0.394" |
0.039 | 300 |
$300 |
|
| 50 | $110 | ||||
| 15 | $39.60 | ||||
1.18" |
0.591" |
0.039 | 300 |
$417 |
|
| 50 | $130 | ||||
| 15 | $46.80 | ||||
1.58" |
0.787" |
0.039 | 300 |
$516 |
|
| 165 | $297 | ||||
| 50 | $157.50 | ||||
| 15 | $56.70 | ||||
1.97" |
0.985" |
0.039 | 300 |
$663 |
|
| 50 | $220 | ||||
| 15 | $78.75 | ||||
2.36" |
1.18" |
0.039 | 100 |
$262 |
|
| 50 | $200 | ||||
| 15 | $97.50 | ||||
| 2.76" | 1.38" | 0.039 | 100 |
$340 |
|
| 50 | $240 | ||||
| 15 | $115 | ||||
| 3.15" | 0.157" | 0.039 | 100 |
$424 |
|
| 50 | $260 | ||||
| 15 | $145 |
For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F
 |
Military Specification (M23053) and Manufacturers' Cross Reference List
Not sure what you need? Try our new Heat Shrink Selector
General Purpose and Adhesive Lined Heat Shrink Tubing
High Temperature and Chemical Resistant Heat Shrink Tubing
| Kynar, PVDF heat shrink | PTFE Heat Shrink tubing (/12) | FEP Heat Shrink tubing (/11) |
| Diesel Resistant Heat Shrink (DR-25, R-120, /16) | Viton Heat Shrink (/13) | Neoprene Shrink Tubing (/1) |
Ultra Thin Wall and Low Shrink Temperature (80°C)Heat Shrink Tubing
| Ultra Thin Wall Polyolefin Heat Shrink Tubing | Ultra Thin Wall PVC Heat Shrink Tubing | Low Shrink Temperature Polyolefin Heat Shrink Tubing |
Tools and Accessories
Home | Contact Us | Site Map | Shipping and Ordering Policies | Frequently Asked Questions | 
Google Plus (+1)
All material on this site is copyright © 2006-2018 BuyHeatShrink.com. Any reproduction without written permission from BuyHeatShrink.com. is strictly prohibited.