- Home
- Heat Shrink Tubing
- Cable Ties
- Braided Sleeving
- Bentley Harris
- Label and Heat Shrink Printers
- Heat Shrink Cutters
- Plastic Tubing
- Heat Guns and Tools
- Floor Cord and Cable Covers
- Power & Data Distribution
- Audio/Video/Network Cables & accessories
- Site Map
- Shipping and Ordering Policies
- Frequently Asked Questions
-
-
3:1 pre-cut Adhesive Lined Heat Shrinkable Tubing
3 to 1 Adhesive Lined Heat Shrinkable Tubing
Our 3:1 heat shrink tubing is also available with a "dual-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.
Features:
- 3:1 Shrink Ratio with melt adhesive inner lining (shrinks to 1/3 its original diameter)
- Up to 15% longitudinal shrinkage
- Meets requirements of AMS-DTL-23053/4 (formerly MIL-I-23053/4), Class 3
- UL 224 VW-1 and CSA OFT recognized
- Maximum use temperature 135°C
- Shrink Temperature of 90°C and operating temperature of -55°C to + 110°C
- Crosses to : Sumitomo W3B2, Raychem ATUM, Alpha FIT-321, 3M EPS-300, Canusa CPA-100 , LG GSHS-3635W
- Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
Colors available: Black, Red, Clear, White, Blue, Green, and Yellow
3:1 Dual Wall Adhesive Lined Heat Shrink Tubing - Ordering Information
2-3 week lead time for all cut pieces
Size |
Ordering
Information |
|||
Nominal |
Before
Shrinking |
After shrinking |
pcs/Bag |
Select Color and cut length, then Add to Cart |
1/8" |
0.120" |
.040" |
1000 |
|
3/16" |
0.180" |
.060" |
1000 |
|
1/4" |
0.240" |
.080" |
500 |
|
3/8" |
0.360" |
.120" |
500 |
|
1/2" |
0.470" |
.160" |
500 |
|
3/4" |
0.750" |
.250" |
250 |
|
1" |
0.940" |
.320" |
100 |
|
1 ½" |
1.570" |
.440" |
100 |
|
For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F
 |
*Also available in reels and precut pieces. Please inquire.
M23053 Color Codes:
-0 Black, -1 Brown, -2 Red, -3 Orange, -4 Yellow, -5 Green, -6 Blue, -7 Violet, -8 Gray, -9 White, -C Clear
Military Specification (M23053) and Manufacturers' Cross Reference List
Not sure what you need? Try our new Heat Shrink Selector
General Purpose and Adhesive Lined Heat Shrink Tubing
High Temperature and Chemical Resistant Heat Shrink Tubing
| Kynar, PVDF heat shrink | PTFE Heat Shrink tubing (/12) | FEP Heat Shrink tubing (/11) |
| Diesel Resistant Heat Shrink (DR-25, R-120, /16) | Viton Heat Shrink (/13) | Neoprene Shrink Tubing (/1) |
Ultra Thin Wall and Low Shrink Temperature (80°C)Heat Shrink Tubing
| Ultra Thin Wall Polyolefin Heat Shrink Tubing | Ultra Thin Wall PVC Heat Shrink Tubing | Low Shrink Temperature Polyolefin Heat Shrink Tubing |
Tools and Accessories
Home | Contact Us | Site Map | Shipping and Ordering Policies | Frequently Asked Questions | 
Google Plus (+1)
All material on this site is copyright © 2006-2018 BuyHeatShrink.com. Any reproduction without written permission from BuyHeatShrink.com. is strictly prohibited.